Fire investigations
The Queensland Fire and Emergency Services has over 60 fire investigators. They determine the causes of both accidental and deliberately lit fires.
After a fire, investigators examine electrical and gas appliances (and other items)—at the scene, and in the laboratory—to find the cause of the fire.
Information gathered on the cause of fires is used to:
help prevent future fires
educate the community on fire danger
identify and recall dangerous products from the market
improve fire fighting and building fire safety.
Fire database
A comprehensive database is being developed with information about:
how and why fires started
how injuries and deaths occur during fires
how loss of life and property could have been avoided
what safety equipment was in place (smoke alarms, fire extinguishers)
the people involved in the fire (including details such as age, ethnicity, and living arrangements).
The database aims to reduce the number of fire deaths and injuries in Queensland.
What homes require smoke alarms?
From 1 January 2022, landlords must install interconnected, photoelectric smoke alarms in residential rental properties.
While all other existing dwellings must be fully compliant by 2027, owners should begin transitioning to the new requirements. For example, they must replace alarms that are faulty or more than 10 years past manufacture date with new photoelectric alarms.
The new law requires smoke alarms to be installed in every bedroom, in hallways and on every storey.
Your smoke alarms must:
be photoelectric comply with Australian Standard 3786-2014 be interconnected so when one goes off, they all go off be less than 10 years old operate when tested. If you need to replace a smoke alarm hardwired to your power supply, the new alarm must also be hardwired. Otherwise, your alarms can be powered by a 10-year non-removable battery. Existing dwellings may have a combination of both.
A licenced electrician will need to install hardwired alarms, whereas no license is required to install battery-operated alarms. Interconnection can be either wireless or through hardwiring.
Find out more
